The base of the box section is provided with a fork and a hanging hole, which can be handled flexibly on site.
The box sections can be transported in sections, and the extra-large box sections can be shipped in pieces and assembled on site.
The modular design makes the cabinet parts interchangeable and easy to assemble on site.
The connection of the box section is flat and the site connection is convenient.
The bottom of the box section is equipped with mounting holes to fix the unit to the foundation.
1. Hanmer air conditioning box
2. Cabinet type: C-hanging type H-horizontal V-vertical type
3. Product serial number
4. Box plate thickness T-25mm F-50mm
5~7. Nominal air volume (x 100m3/h)
8. Take-up direction L-left connection R-right connection
9. Coil row number 4-4 row 6-6 row 8-8 row
The frame structure is designed without the concept of a cold bridge.
The internal surface of the unit is smooth and smooth, and it is not easy to accumulate dust. It is suitable for use in purification systems.
The unit adopts modular design, the size module is 100mm, and the unit size is increased or decreased by multiples of 100mm.
The panel is made of double sandwich sandwich structure. The panel is made of special aluminum profiles, which has excellent thermal insulation properties and excellent panel strength.
The inside of the panel is made of polyurethane foam material. The foaming density is 48kg/m3, which can effectively prevent the cold volume transmission.
The standard panel is configured as an inner and outer double-layer steel plate. It can also be made of stainless steel or other materials according to requirements.
The thickness of the panel is available in 25mm or 50mm.
Excellent sealing and extremely low air leakage rate
The skeleton and the panel are double-sealed, and the sealing material is made of rubber, which has good elasticity and anti-aging properties.
The sealing rubber is hollow and has positive and negative pressure follow-up. It has self-pressing function regardless of positive pressure and negative pressure.
The panel is relative to the frame by screws with a special aluminum alloy pressure plate, which is firm and reliable.
The air leakage rate of the unit cabinet is less than 1% under 1000Pa standard working conditions.
High heat transfer efficiency
The heat exchange coil is made of seamless copper tube and aluminum fin, which are tightly combined by the expansion tube.
The coil standard is available in 2-12 rows, and the aluminum fin standard is 2.5mm. Other sheet sizes are also available.
The selection calculation program can optimize the parameters such as the number of rows of coils, the length of the coil, and the number of circuits under the required working conditions to ensure that the actual use requirements are met.
The unique coil tube design ensures thorough drainage and minimizes coil collapse.
There is a condensate water tray under the cold coil of the watch, and the dry V-shaped design has a drainage slope to ensure the smooth discharge of the condensed water. The outside is coated with heat to prevent condensation from forming.
Smooth operation. Low noise
The fan is made of domestic or international famous brand products.
Adopt DIDW double inlet air, double wide distance high efficiency low noise centrifugal fan.
The fan bearing adopts brand-name products and has self-aligning and self-locking functions. The wind motor balance accuracy reaches G4.0, which greatly extends the service life of the bearing.
The fan selection software can select high-efficiency fans according to the actual operating conditions. Ensure that the fans operate under the “energy” point of high efficiency and energy saving.
The standard uses a V-belt drive structure, and uses the Taper Lock bushing pulley and the inlet narrow V-belt. The narrow V-belt has a wide bevel structure for higher transmission efficiency and service life.
Choose well-known brand three-phase squirrel-cage flow induction motor, IP54 protection grade, Class F insulation. The motor standard is placed inside the fan section and is mounted on the damping bracket together with the fan. The motor is equipped with an adjustment device to adjust the tightness of the belt.